Electronic Brake Control Module: Notes
WARNING: This page is about a different car, the 2001 GMC Safari and 2001 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Use correct fastener in correct location. Replacement fasteners must be correct part number for application. Fasteners requiring replacement or fasteners requiring use of thread locking compound or sealant are identified in service procedures. DO NOT use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage fastener. Use correct tightening sequence and specifications when installing fasteners in order to avoid damage to part and systems.
NOTE:
Before Electronic Brake Control Module (EBCM) removal, Thoroughly wash all contaminants from around Brake Pressure Modulator Valve (BPMV) assembly. Area around pump assembly must be free from loose dirt to prevent contamination of disassembled ABS components.
NOTE:
DO NOT use a tool to pry apart EBCM from BPMV. Excessive force will damage EBCM
NOTE:
After installation, calibrate new EBCM to tire size that is appropriate to vehicle.