Front Wheel Toe Adjustment

1. Set the steering wheel in a straight-ahead position within -3.5 to 3.5 degrees.
2. Make toe adjustments separately at each individual tire and wheel.





3. Loosen the inner tie rod nut (4).
4. Adjust the toe to specifications by turning the inner tie rod (3). Refer to Wheel Alignment Specifications.

Notice: Refer to Fastener Notice in Service Precautions.

5. Verify that the steering gear boot seal (5) is not twisted.
- Tighten the inner tie rod nut (4) to 47 Nm (35 ft. lbs.).
6. Check the toe alignment. Readjust the inner tie rod (3), if necessary. Refer to Wheel Alignment Specifications.