Front Caster Adjustment

Front Caster Adjustment Procedure





1. Loosen the lower control arm cam bolt nuts.
2. Rotate the cam bolts to the required caster specification setting. Refer to Wheel Alignment Specifications.

Notice: Refer to Fastener Notice in Service Precautions.

3. Maintain the caster setting while tightening the cam bolt nuts.
- Tighten the front lower control arm cam bolt nuts to 170 Nm (125 ft. lbs.).

Important: Check the toe setting AFTER changing camber or caster.

4. Check the caster and camber settings after tightening.
5. Adjust the caster and camber setting if necessary.