Alarm Module Replacement

Removal Procedure

Caution: Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure.
2. Remove the retainers from the alarm or module.
3. Disconnect the electrical connectors.
4. Remove the alarm or module from the vehicle.

Installation Procedure





1. Install the alarm or module to the vehicle.
2. Connect the electrical connectors.
3. Install the retainers to the alarm or module.
4. Connect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure.