Memory Seats

WARNING: This page is about a different car, the 2000 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For additional information on memory seat systems, see MEMORY SYSTEMS - CORVETTE article.

Memory functions are controlled with buttons located in armrest of driver's door. Memory seat, outside mirror, climate control and stereo settings for up to 3 different drivers can be recorded into the seat control module through memory panel buttons.

To program seat control module, move seat to desired position. Depress and hold No. 1 memory button until indicator light above the memory button glows steady. Continue to hold button down. When position has been stored, light will flash once. To record second setting, repeat function and depress No. 2 button. For third setting, No. 1 and 2 buttons will need to be depressed simultaneously.

To recall a position, depress the button that corresponds with the setting you want recalled. Indicator light will flash until programmed position is achieved. Memory recall will not work if the vehicle is moving, the key is out of the ignition switch or if a seat or memory switch is being used.