Ignition Control Module (IDI): Installation

WARNING: This page does not describe the selected car, but rather 36 other vehicles, including the 2001 Saturn SW2, 2001 Saturn SL2, 2001 Saturn SL1, 2001 Saturn SL, and 2001 Saturn SC2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: DO NOT wipe grease from module or coil if module is not being replaced. If installing a NEW module, spread silicone grease on metal face of module and on cover where module seats. Grease is included with NEW module and is necessary for module cooling purposes.

To install, reverse removal procedure. Tighten screws and bolts to specification. See TORQUE SPECIFICATIONS .