Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.

Drain the washer solvent from the washer solvent container.
Remove the right front fender liner. Refer to FRONT FENDER LINER REPLACEMENT
Disconnect the washer solvent container level sensor electrical connector.
Using a small flat-bladed tool, remove the washer solvent level sensor from the washer solvent container.
Using a small flat-bladed tool, remove the seal from the washer solvent container.

Fig 1: Removing Washer Solvent Level Sensor, Electrical Connector & Seal
Courtesy of GENERAL MOTORS CORP.