Electronic Brake Control Module & Brake Pressure Modulator Valve Assembly: Installation
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2001 Pontiac Sunfire, 2001 Pontiac Grand Am, 2001 Oldsmobile Alero, 2001 Chevrolet Monte Carlo, and 2001 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse removal procedure. Ensure brakelines are installed in original locations. Ensure EBCM harness connector tab is locked down. Tighten bolts, nuts and brakelines to specification. See TORQUE SPECIFICATIONS .
- If NEW BPMV assembly is being installed, ensure shipping plugs are removed from valve openings. Refill brake master cylinder reservoir, bleed brakes and check for leaks. See BLEEDING BRAKE SYSTEM .
- Using scan tool, perform DIAGNOSTIC SYSTEM CHECK under DIAGNOSIS & TESTING and check if any DTCs have been set. Diagnose and repair as necessary.