Cruise Control System

Pressing CRUISE ON/OFF lever in turns system on. CRUISE indicator light in instrument cluster will illuminate. To set system, drive vehicle at desired speed, move cruise lever downward to SET/COAST position and release lever. Press CRUISE ON/OFF lever in again to turn cruise control system off.

Cancel set speed by pulling cruise control lever toward driver (CANCEL position), pressing CRUISE ON/OFF lever in, pressing brake pedal, pressing clutch pedal (M/T) or downshifting transaxle. If vehicle speed slows to less than 25 MPH, set speed will automatically disengage. If vehicle speed decreases to 10 MPH less than set speed, set speed will also disengage. If Cruise Control Module (CCM) detects a system malfunction, set speed will automatically cancel and CRUISE indicator light will flash several times.

Moving cruise control lever up to RES/ACC (resume/accelerate) position allows vehicle to return to speed set before disengagement. Moving cruise control lever up to RES/ACC position and keeping it there gradually increases vehicle speed. Moving cruise control lever down to SET/COAST position and keeping it there gradually decreases vehicle speed.