Specifications Index
PRIZM SPECIFICATIONS INDEX
| System | Specification/Procedure | |
|---|---|---|
| Air Conditioning | ||
| Service | SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Axle Nut/Hub Nut | 166 Ft. Lbs. (225 N.m) | |
| Battery | NA | |
| Brakes | ||
| Bleeding Sequence | BLEEDING SEQUENCE | |
| Disc Brakes | FRONT DISC BRAKE SPECIFICATIONS | |
| Drum Brakes | REAR DRUM BRAKE SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Charging | ||
| Generator | GENERATOR SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Drive Belts | ||
| Adjustment | BELT ADJUSTMENT | |
| Belt Routing | See appropriate illustration under SERPENTINE BELT ROUTING & ALIGNMENT | |
| Engine Cooling | ||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | |
| Radiator Cap Pressure | 13 psi | |
| Thermostat R & I | N/A | |
| Water Pump R & I | WATER PUMP | |
| Engine Mechanical | ||
| Compression | ENGINE COMPRESSION | |
| Oil Pressure | With engine at normal operating temperature, oil pressure should be greater than 4.3 psi (.3 kg/cm2 ) at idle and 43-78 psi (3.0-5.5 kg/cm2 ) at 3000 RPM. | |
| Overhaul | ENGINE SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | |
| Flywheel/Flex Plate Torque | ||
| A/T | 61 Ft. Lbs. (83 N.m) | |
| M/T | Step 1 - 36 Ft. Lbs. (49 N.m) Step 2 - Additional 90 Degrees |
|
| Fuel System | ||
| Pressure Specification | 44-50 psi (3.1-3.5 psi (kg/cm2 ) Ignition ON and engine OFF | |
| Fuel Pressure Test Procedure | FUEL SYSTEM PRESSURE TEST | |
| Fuel Filter Location and R & I | REMOVAL PROCEDURE (PRIZM) | |
| Ignition | ||
| Firing Order & Cylinder Identification | See FIRING ORDER & CYLINDER IDENTIFICATION | |
| Ignition Wires (Resistance) | HIGH TENSION WIRE RESISTANCE | |
| Ignition Wires (Routing) | NA | |
| Spark Plug | ||
| Type | Denso K16TR11 NGK BKR5EKB11 |
|
| Gap | 0.043 In. (1.1 mm) | |
| Torque | 13 Ft. Lbs. (18 N.m) | |
| Starting | ||
| Starter | STARTER SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Wheel Alignment | ||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Wheel & Tire | ||
| Wheel Lug Nut Torque | 65 Ft. Lbs. (85 N.m) | |