LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2000 >> Venture Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 452 (Stationary Window System) >> Repair Instructions >> Windshield Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a stationary window into the opening. Refer to URETHANE ADHESIVE INSTALLATION OF STATIONARY WINDOWS  .
  2. Install the instrument panel upper trim panel. Refer to TRIM PAD REPLACEMENT -- INSTRUMENT PANEL (I/P) UPPER (AZTEK) or TRIM PAD REPLACEMENT -- INSTRUMENT PANEL (I/P) UPPER (RENDEZVOUS) .
  3. Install the windshield garnish moldings. Refer to GARNISH MOLDING REPLACEMENT -- WINDSHIELD PILLAR .
  4. Install the antenna connector. Refer to ANTENNA CABLE REPLACEMENT .
  5. Install the rearview mirror. Refer to REARVIEW MIRROR REPLACEMENT  .
  6. Install the door auxiliary weatherstrip from the upper pinchweld flange.
  7. Install the air inlet grille. Refer to AIR INLET GRILLE PANEL REPLACEMENT .
  8. Install the windshield wiper arms. Refer to WIPER ARM REPLACEMENT .
  9. Remove the double layer of masking tape from around the perimeter of the painted surfaces and the interior trim.
  10. Close the hood.
scientia non olet · About LEMON Manuals