Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Install the generator bracket.
- Install the generator bracket bolts.
Tighten: Tighten the generator bracket bolts in the sequence shown to 50 N.m (37 lb ft).
- Install the drive belt tensioner. Refer to Drive Belt Tensioner Replacement in Engine Mechanical-3.4L.
- Install the generator. Refer to Generator Replacement (LA1) or Generator Replacement (LY7) .
NOTE:
Refer to Fastener Notice in Cautions and Notices.