Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Install the cooling fan.
- Install the cooling fan nut.
Tighten: Tighten the nut to 6 N.m (53 lb in).
- Install the cooling fans with the cooling fan shroud. Refer to Cooling Fan Replacement - Electric (LA1) or Cooling Fan Replacement - Electric (LY7) .
NOTE:
Refer to Fastener Notice in Cautions and Notices.
IMPORTANT:
Turn the cooling fan nut counterclockwise to tighten.