LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2000 >> Venture Value >> Repair and Diagnosis >> External Pages >> Different car >> Section 574 (Front Suspension System) >> Repair Instructions >> Strut, Strut Component and/or Spring Replacement >> Disassembly Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Disassembly Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the strut from the vehicle. Refer to Strut Assembly Replacement .
  2. Install the strut (2) in the J 45400  (1). See Special Tools and Equipment .
    Fig 1: Compressing/Releasing Lower Part Of Shock Spring
    GM743246Courtesy of GENERAL MOTORS CORP.
    3. IMPORTANT: The spring is compressed when the strut moves freely.
    Fig 2: View Of Compressor Forcing Screw & Coil Spring
    GM743241Courtesy of GENERAL MOTORS CORP.
  3. Turn the spring compressor forcing screw (1) until the coil spring (2) is compressed.
  4. Use a 45 TORX® socket in order to hold the strut shaft. Use the J 42991  to remove the upper strut mount nut. See Special Tools and Equipment .
  5. Remove the strut from the J 45400  . See Special Tools and Equipment .
  6. Loosen the compressor forcing screw (1) until the upper strut mount and coil spring (2) may be removed.
  7. Remove the upper strut mount and the coil spring from the J 45400  . See Special Tools and Equipment .
scientia non olet · About LEMON Manuals