Installation Procedure
- Slide the module in until seated.
- Refer to Fastener Notice
in Cautions and Notices.
Install the memory module retaining screws (1).
Tighten
Tighten the screws to 3 N.m (26 lb in).
- Connect the harness connectors (2).
- Install the seat cushion. Refer to Driver or Passenger Seat Cushion Frame Replacement .
- Install the seat trim panel. Refer to Front Seat Trim Panel Replacement .
- If you installed a new memory seat, calibrate the seat. Refer to Memory Seat Calibration .