LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2001 >> Corvette Base, 2D Convertible, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Remote Keyless Entry Systems >> Programming >> Transmitter Programming & Synchronization >> Programming Transmitters
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming Transmitters

Entering a specific button sequence on Driver Information Center (DIC) initiates Remote Function Actuation (RFA) programming. Pressing transmitter LOCK and UNLOCK button on each transmitter, allows programming for up to 3 transmitters. Instrument Panel Cluster (IPC) indicates when programming sequence is complete. Remote control door lock receiver memory retains current access codes if a programming sequence is interrupted or battery is disconnected. To program transmitters perform the following steps:

  1. Turn ignition on. Turn radio off. Press Driver Information Center (DIC) RESET button to clear any Instrument Panel Cluster (IPC) warning messages. Press and release OPTIONS button on DIC to scroll through display options until IPC display is blank.
  2. Press and hold RESET button for 3 seconds. Press OPTIONS button until FOB TRAINING message is displayed. Press RESET button once to begin programming sequence.
  3. IPC will display HOLD LK + UNLK 1ST FOB. Simultaneously press and hold LOCK and UNLOCK buttons on first transmitter for 15 seconds. IPC will indicate FOB LEARNED when transmitter is programmed and prompt for next transmitter. Repeat this step for each additional transmitter, or press OPTIONS button to exit.
scientia non olet · About LEMON Manuals