Content Theft Deterrent Arming/Disarming Modes
- Enter feature customization mode. See ENTER FEATURE CUSTOMIZATION MODE
. Insert a second key into any door lock cylinder. Rotate key to UNLOCK position and hold for one second. Count number of chimes in order to determine current mode (1-3). See CONTENT THEFT DETERRENT SYSTEM ARMING/DISARMING MODES
table.CONTENT THEFT DETERRENT SYSTEM ARMING/DISARMING MODES
Mode Arms Using Door Lock Cylinder Key Disarms Using Door Lock Cylinder Key Arms Using Power Door Lock Switch Disarms Using Power Door Lock Switch Arms & Disarms Using RKE Transmitter 1 Disabled Enabled Disabled Disabled Enabled 2 Disabled Disabled Disabled Disabled Enabled 3 Disabled Enabled Enabled Disabled Enabled - To change mode, rotate second key or press PANIC button on Remote Keyless Entry (RKE) system transmitter (if equipped) to advance to next mode until desired mode is reached, then remove second key. Chime will sound number of times equivalent to mode. Chime indicator sequence will repeat after chime sounds for mode 3. Mode 1 is default mode.
- To exit and save current feature customization mode settings, turn ignition switch to LOCK position. Reinstall BCM PRGRM (10-amp) fuse. If unable to change content theft deterrent arming/disarming modes, diagnose anti-theft system fault. See THEFT DETERRENT DIAGNOSTIC SYSTEM CHECK under SELF-DIAGNOSTIC SYSTEM.