LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2001 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Lock System & Remote Keyless Entry System >> Programming >> Feature Customization Modes >> Delayed & Exit Illumination Modes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Delayed & Exit Illumination Modes

NOTE: Instrument Panel (IP) brightness control switch may also be referred to as IP dimmer switch.
  1. Enter feature customization mode. See ENTER FEATURE CUSTOMIZATION MODE  . Turn IP brightness control switch to DOME position. Count number of chimes to determine current mode (1-4). See DELAYED & EXIT ILLUMINATION MODES  table.
    DELAYED & EXIT ILLUMINATION MODES

    Mode Delayed Illumination Exit Illumination
    1 Disabled Disabled
    2 Enabled Disabled
    3 Disabled Enabled
    4 Enabled Enabled
  2. To change mode, cycle IP brightness control switch from OFF position to DOME position to advance to next mode until desired mode is reached. Chime will sound number of times equivalent to mode. Chime indicator sequence will repeat after chime sounds for mode 4. Mode 4 is default mode.
  3. To exit and save current feature customization mode settings, turn ignition switch to OFF position. Reinstall BCM PRGRM (10-amp) fuse.
scientia non olet · About LEMON Manuals