Body Control Module: Notes
NOTE:
Before replacing any control module, ensure all module ground and power circuits are functioning properly. For circuit identification, see GROUND DISTRIBUTION and POWER DISTRIBUTION articles in WIRING DIAGRAMS.
NOTE:
After Body Control Module (BCM) is replaced, feature customization settings will automatically resort to default settings. Feature customization settings will need to be programmed as needed. See ENTER FEATURE CUSTOMIZATION MODE
under PROGRAMMING.
NOTE:
On models with factory installed Content Theft Deterrent (CTD) anit-theft system, ensure replacement BCM type 4 is installed. Feature customization settings must be programmed. See ENTER FEATURE CUSTOMIZATION MODE
under PROGRAMMING.