LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2001 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 875 (Cruise Control System) >> Repair Instructions >> Cruise Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the cruise control module to the mounting bracket.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the mounting bracket bolt to the cruise control module.

    Tighten 

    Tighten the bolt to 6 N.m (53 lb in).

    Fig 1: Installing Cruise Control Module To Mounting Bracket
    G01813581Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector to the module.
  4. Install the cruise control cable to the module. Refer to Cruise Control Cable Replacement .
  5. Adjust the cruise control cable. Refer to Cruise Control Cable Replacement .
    Fig 2: Connecting Electrical Connector (Cruise Control Module)
    G01813582Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals