LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2001 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 875 (Cruise Control System) >> Repair Instructions >> Cruise Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cruise control cable from the module. Refer to Cruise Control Cable Replacement .
  2. Disconnect the electrical connector.
    Fig 1: Disconnecting Electrical Connector (Cruise Control Module)
    G01813579Courtesy of GENERAL MOTORS CORP.
  3. Remove the mounting bracket bolt from the cruise control module.
    Fig 2: Removing Cruise Control Module From Mounting Bracket
    G01813580Courtesy of GENERAL MOTORS CORP.
  4. Remove the cruise control module from the mounting bracket.