LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2002 >> Camaro Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Stabilizer Shaft Insulator Clamps, Stabilizer Shaft Link & Nuts
    GM66493Courtesy of GENERAL MOTORS CORP.
  1. Install the stabilizer shaft, insulator clamps and bolts to the crossmember.
  2. Install the stabilizer shaft links to the stabilizer shaft.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the stabilizer shaft link nuts.

    Tighten:  Tighten the stabilizer shaft link nuts to 72 N.m (53 lb ft).

  4. Install the stabilizer shaft insulator clamp bolts.

    Tighten:  Tighten the stabilizer shaft insulator clamp bolts to 58 N.m (43 lb ft).

  5. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals