Torque Specifications
WARNING: This page is about a different car, the 2003 Chevrolet Monte Carlo and 2003 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Case Cover-To-Driven Sprocket Support Bolt | 18 (25) | |
| Case-To-Drive Sprocket Support Bolt | 18 (25) | |
| Case Extension-To-Case Bolt | 26 (36) | |
| Case Side Cover-To-Case Bolt | 18 (25) | |
| Case Side Cover-To-Case Stud | 18 (25) | |
| Case Side Cover-To-Case Bolt (TORX(R)) | 18 (25) | |
| Manual Shaft/Detent Nut | 23 (32) | |
| Oil Cooler Fittings | 28 (38) | |
| Oil Cooler Quick Connector | 28 (38) | |
| Oil Cooler Quick Connector (With Check Ball) | 28 (38) | |
| Oil Pan-To-Case Bolt | 10 (14) | |
| Pump Body-To-Case Bolt | 11 (16) | |
| TFP Switch-To-Case Bolt | 11 (16) | |
| Torque Converter-To-Flexplate Bolt | 46 (63) | |
| Transaxle Brace-To-Engine Bolt | 46 (63) | |
| Transaxle Brace-To-Transaxle Bolt | 32 (43) | |
| Transaxle Mount Bracket Bolt | 70 (95) | |
| Transaxle Mount Lower Nut | 46 (63) | |
| Transaxle Mount Upper Nut | 35 (47) | |
| Transaxle Shift Cable Bracket Bolt | 22 (30) | |
| Transaxle-To-Engine Bolt/Stud | 55 (75) | |
| Transaxle Wiring Ground Nut | 18 (25) | |
| Valve Body-To-Driven Sprocket Support Bolt | 18 (25) | |
| INCH Lbs. (N.m) | ||
| Accumulator Cover-To-Case Bolt | 106 (12) | |
| Case Cover-To-Case Bolt | ||
| M6x1.0x30 | 106 (12) | |
| M6x1.0x40 | 106 (12) | |
| Case Cover-To-Driven Sprocket Support Bolt (TORX(R)) | 106 (12) | |
| Detent Spring-To-Case Cover Bolt | 106 (12) | |
| Fluid Filler Tube Bracket Bolt | 115 (13) | |
| Forward Band Servo Cover-To-Case Bolt | 106 (12) | |
| Oil Cooler Hose/Pipes Retaining Bracket Bolt | 27 (4) | |
| Oil Pressure Test Hole Plug | 106 (12) | |
| Pump Cover-To-Case Cover Bolt | 106 (12) | |
| Pump Cover-To-Pump Body Bolt | 70 (8) | |
| Speed Sensor-To-Case Bolt | 106 (12) | |
| TFP Switch-To-Case Cover Bolt | 106 (12) | |
| TFP Switch-To-Valve Body Bolt | 70 (8) | |
| Torque Converter Cover Bolt | 89 (10) | |
| Valve Body-To-Case Bolt | ||
| M6x1.0x65 | 106 (12) | |
| M6x1.0x85 | 106 (12) | |
| Valve Body-To-Case Cover Bolt | ||
| M6x1.0x30 | 106 (12) | |
| M6x1.0x55 | 106 (12) | |
| Valve Body-To-Case Cover Bolt (TORX(R)) | 106 (12) | |
| 2-1 Servo-To-Case Bolt | 18 (25) | |