Removal Procedure

Using a small flat-bladed tool release the power accessory switch plate retainers (1).
Push in and lift up on the retainers (1) to remove the switch plate from the door trim panel.

Fig 1: Removing Power Accessory Switch Plate
Courtesy of GENERAL MOTORS CORP.
Disconnect the electrical connectors (1, 2) from the switches.

Fig 2: Disconnecting Power Accessory Switch Plate Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Release the retaining tabs for the power window switch, if required.
Push the window switch out of the switch plate.
Release the retaining tabs for the power mirror switch, if required.
Push the power mirror switch out of switch plate.