Programming Variable Effort Steering with the Tech 2
WARNING: This page is about a different car, the 2002 Cadillac Eldorado. However, it is still accessible from the selected car via links, so may be relevant.
Perform the following steps to program the response mode:
- Install the scan tool.
- Turn ON the ignition with the engine OFF.
- Select the correct vehicle and model year.
- Select Chassis.
- Select Recalibration.
- Press Enter.
- Select YES if the VIN # is correct.
- Select YES if vehicle has Magna Steer RPO # NV8.
- Select NO to select other than Factory Standard calibration mode.
- Select the desired response mode.
- When procedure is complete, press EXIT to return to the menu.