LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2002 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 732 (Wiper System And Washer System) >> Repair Instructions >> Washer Solvent Container Level Sensor Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the washer solvent container.
  2. Remove the right front fascia extension. Refer to FASCIA EXTENSION REPLACEMENT -- FRONT .
  3. Disconnect the electrical connector from the washer solvent level sensor.
    Fig 1: Disconnecting Electrical Connectors
    G01801004Courtesy of GENERAL MOTORS CORP.
  4. Remove the washer solvent level sensor from the washer solvent container.
    Fig 2: Removing Washer Solvent Level Sensor
    G01801005Courtesy of GENERAL MOTORS CORP.