LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2002 >> Venture Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Front Suspension System) >> Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Specifications

WARNING: This page is about a different car, the 2002 Pontiac Grand Am, 2002 Oldsmobile Alero, and 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Axle Shaft (Hub) Nut See TSB 03-04-18-001 AVAILABILITY OF NEW FRONT DRIVE AXLE NUT AND NEW SPECIFICATION .
Ball Joint
To Control Arm Bolt/Nut (1)
To Steering Knuckle Nut (2) 41 (55)
Brake Caliper
Bracket Bolts 85 (115)
Mounting Bolts 23 (31)
Crossmember Bolts
Front
Step 1 44 (60)
Step 2 Additional 120 degrees
Rear
Step 1 74 (100)
Step 2 Additional 180 degrees
Hub & Bearing Assembly Bolts 70 (95)
Intermediate Shaft Lower Pinch Bolt 15 (20)
Lower Control Arm-To-Crossmember Bolts
Front
Step 1 85 (115)
Step 2 Additional 120 degrees
Rear
Step 1 181 (245)
Step 2 Additional 180 degrees
Stabilizer Bar
Insulator Bracket Bolts 49 (66)
Link-To-Lower Control Arm Nut 13 (17)
Strut Assembly
To Steering Knuckle Nuts 133 (180)
To Upper Body Mount Fasteners 18 (25)
Piston Rod Nut 55 (75)
Tie Rod
Ball Stud Nut (Prevailing Torque) 15 (20)
Adjuster Jam Nut
Except Malibu 55 (75)
Malibu 50 (68)
Transmission Mount Bolt 89 (120)
Wheel Lug Nut 103 (140)
(1) Tighten to specification indicated in service ball joint kit.
(2) Tighten nut to specification, then tighten nut further to align cotter pin. DO NOT tighten nut more than 50 ft. lbs. (68 N.m).