LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> Astro Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1247 (Cruise Control System) >> Repair Instructions >> Cruise Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the cruise control module.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the cruise control module bolts.

    Tighten 

    Tighten the cruise control module bolts to 12 N.m (106 in. lb.).

  3. Connect the electrical connector.

    Important:  The cruise control cable does not require mechanical adjusting after the replacement. The cruise control module internally adjusts the cable.

  4. Install the cruise control cable. Refer to Cruise Control Cable Replacement .
  5. Perform the functional check.
    Fig 1: Installing Cruise Control Module
    G02506443Courtesy of GENERAL MOTORS CORP.