Scan Tool Data List Definitions
CAUTION:
When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery.
NOTE:
See appropriate PID VALUE chart for specific PID application.
The column labeled Data List indicates where a parameter is located on the scan tool. Review the scan tool operating manual for the exact locations of the data lists. The following is a description of each term listed.
- All
The parameter is in all data lists indicated below. - Eng 1
Engine Data 1 List - Eng 2
Engine Data 2 List - Eng 3
Engine Data 3 List - CC
Cruise Control Data - EE
Enhanced EVAP Data - FT
Fuel Trim Data List - MF
Misfire Data List - TAC
TAC Data List