Scan Tool Data Definitions

SCAN TOOL DATA DEFINITIONS

Accessory Switch: Input from ignition switch accessory circuit. Used to determine power mode. Hot in ACC and ON.

Battery Voltage: The scan tool displays 0.0-16.0 volts. The battery voltage input represents the system voltage measured at the BCM ignition feed input.

Ignition Unlock: Input to the control module from the ignition switch indicating the Ignition 0 position. Switch closed (HOT) in ignition switch positions UNLOCK, ACC, ON, and START

Key in Ignition: Input from ignition switch indicating that the ignition key is inserted into the ignition switch. HOT with key in ignition switch.

Module Part Number: Indicates the module part number.

Run/Crank: Input to the control module from the ignition switch indicating the Ignition 1 position. Switch closed (HOT) in ignition switch positions ON and

START Software Design Suffix: Details the software version used.

Software Part Number: Part number of the software.