Manual A/C Torque Specifications
MANUAL A/C TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Compressor Crank Case Drain Bolt | 15 (20) |
| Compressor Hose-To-Accumulator Fitting Nut | 18 (25) |
| Compressor Hose-To-Compressor Bolt | 24 (33) |
| Compressor Hose-To-Condenser Block Fitting Nut | 18 (25) |
| Compressor Mounting Bolts | 37 (50) |
| Compressor Shaft Nut | 13 (17) |
| Evaporator Hose-To-Accumulator Fitting Nut | 18 (25) |
| Evaporator Hose-To-Condenser Bolt | 18 (25) |
| Evaporator Hose-To-Evaporator Core Fitting Nut | 18 (25) |
| INCH Lbs. (N.m) | |
| A/C Refrigerant Pressure Sensor | 44 (5) |
| A/C Service Port | 98 (11) |
| Accumulator Bracket Bolt | 89 (10) |
| Air Distribution Duct Bolts | 27 (3) |
| Air Outlet Floor Duct Bolts | 18 (2) |
| Blower Motor Resister Assembly Screws | 9 (1) |
| Blower Motor Screws | 44 (5) |
| Compressor Hose Bracket Bolt | 89 (10) |
| Compressor Pressure Relief Valve | 80 (9) |
| Condenser-To-Radiator Screws | 89 (10) |
| Control Assembly Screws | 18 (2) |
| Defogger Duct Side Window LH Bolt | 18 (2) |
| Defogger Duct Side Window RH Bolt | 18 (2) |
| Evaporator Clamp Screw | 9 (1) |
| Heater Case Plate Nuts | 89 (10) |
| Heater Core Bracket Screws | 9 (1) |
| Heater Core Case Cover Screws | 9 (1) |
| Heater Core Case Shroud Screws | 9 (1) |
| HVAC Control Assembly Screws | 18 (2) |
| HVAC Module Assembly Mounting Bracket Nut | 89 (10) |
| I/P Center Air Deflector screw | 13 (1.5) |
| Lap Deflector Screw | 13 (1.5) |
| Mode/Defroster Valve Case Cover Screw | 9 (1) |
| Recirculation Actuator Housing Screws | 9 (1) |
| Temperature Actuator Screws | 18 (2) |
| Vacuum Harness Clip Screw | 9 (1) |
| Vacuum Tank Screw | 18 (2) |