LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Underbody >> Repair Instructions >> Transmission Support Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Frame Mounting Bolts
    GM752138Courtesy of GENERAL MOTORS CORP.
  1. Install the transmission support to the frame.
    2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the upper transmission support to the frame mounting bolts (1, 2).

    Tighten:  Tighten the upper transmission support to the frame mounting bolts to 80 N.m (59 lb ft).

    3. Fig 2: Identifying Lower Transmission Support to Frame Mounting Bolts
    GM745746Courtesy of GENERAL MOTORS CORP.
  3. Install the lower transmission support to the frame mounting bolts.

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

  4. Lower the transmission onto the transmission support.
    5. Fig 3: View Of Transmission Mount To Transmission Support
    GM744176Courtesy of GENERAL MOTORS CORP.
  5. Install the transmission mount to the transmission support retaining nuts.

    Tighten:  Tighten the transmission mount to the transmission support retaining nuts to 46 N.m (35 lb ft).

  6. Lower the vehicle.
scientia non olet · About LEMON Manuals