LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Control System - 5.3L - Introduction >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

    Fig 1: Engine Sight Shield
    GM1231427Courtesy of GENERAL MOTORS CORP.
  1. Loosen the fasteners from the intake manifold sight shield.
  2. Remove the sight shield.
  3. Disconnect the manifold absolute pressure (MAP) sensor electrical connector.
    4. Fig 2: Identifying MAP Sensor
    GM260159Courtesy of GENERAL MOTORS CORP.
  4. Remove the MAP sensor (1) from the intake manifold.
scientia non olet · About LEMON Manuals