Removal Procedure
- Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling Zone 8 .
- Remove the floor console. Refer to Console Replacement in Instrument Panel, Gages and Console.
- Remove the 3 fasteners to the sensing and diagnostic module (SDM).
- Remove the connection position assurance (CPA) (1) from the SDM.
- Rotate the locking arm (1) to release the electrical connector from the SDM.
- Disconnect the electrical connection from the SDM.
- Remove the SDM from the vehicle.
CAUTION:
Refer to SIR CAUTION
in Cautions and Notices.