Fuel System Pressure Release

Turn ignition off. Disconnect the negative battery cable. Remove the fuel pressure connection valve cap. Install Fuel Pressure Gauge Adapter (J-34730-262) to the fuel pressure connection on the fuel rail. Connect Fuel Pressure Gauge (J-34730-1A) to the fuel pressure connection. Wrap a shop towel around the fuel pressure connection while connecting the fuel pressure gauge in order to avoid spillage. Install the bleed hose into an approved container and open the valve to bleed the system pressure. The fuel connections are now safe for servicing. Drain any fuel remaining in the fuel pressure gauge into an approved container. Remove the fuel pressure gauge and adapter and install the fuel pressure port cap.