Installation Procedure

Install the cruise control module.
NOTE: Refer to Fastener Notice in Cautions and Notices.
Install the cruise control module bolts.
Tighten: Tighten the cruise control module bolts to 12 N.m (106 lb in).

Fig 1: Identifying Cruise Control Module Bolts
Courtesy of GENERAL MOTORS CORP.
Connect the electrical connector to cruise module.
Install cruise control cable bead (2) to ribbon (1).

Fig 2: Locating Cruise Control Cable Bead
Courtesy of GENERAL MOTORS CORP.
Install cruise control cable to throttle body lever.

Fig 3: View Of Cruise Control Cable
Courtesy of GENERAL MOTORS CORP.
Perform the functional check.