LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Chevy Express G2500, Van Cargo Extended, 4.3 X, 4L60E/M30 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 4.3L (Introduction) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying Fuel Sender Assembly
    GM371000Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel pressure sensor (1).
  2. Install the fuel tank. Refer to Fuel Tank Replacement (Cutaway Van Side Tank) Fuel Tank Replacement (Passenger/Cargo Van) Fuel Tank Replacement (Cutaway Van Rear Tank) .
  3. Refill the fuel tank.
  4. Install the fuel filler cap.
  5. Connect the negative battery cable.
  6. Inspect for leaks:
    1. Turn ON the ignition for 2 seconds.
    2. Turn OFF the ignition for 10 seconds.
    3. Turn ON the ignition.
    4. Inspect for fuel leaks.
scientia non olet · About LEMON Manuals