Scan Tool Data Definitions (Cruise Control)
WARNING: This page is about a different car, the 2004 Pontiac Grand Am and 2004 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
- Cruise Control Active
-
Displays Yes or No. The status of the cruise engaged signal. The cruise control module grounds the circuit when cruise control is on.
- Cruise Inhibit Reason
-
The scan tool displays the last cruise control disengage. There are 20 possible causes for cruise control disengagement.
- Cruise Inhibit Signal Command
-
Displays ON or OFF. Indicates if the PCM is commanding the cruise control module to inhibit cruise control operation.
- Cruise Release Clutch/TCC Pedal Switches
-
Displays Applied/Released. The status of the cruise release signal circuit. The TCC/Brake pedal switch and the Clutch Pedal Position (CPP) switch if equipped, are normally closed switches, in series, controlling the cruise control cancel circuit.
- Vehicle Speed Sensor
-
Displays km/h and mph. The vehicle speed sensor is converted into km/h and mph for display.