Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Am and 2004 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.

Remove the left front fender liner. Refer to Front Fender Liner Replacement in Body Front End.

Fig 1: View Of Washer Solvent Container & Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the washer solvent container level sensor electrical connector.

Fig 2: View Of Washer Solvent Container Level Sensor & Container

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: The washer solvent will drain from the washer solvent container when the washer solvent container level sensor is removed. Place a suitable drain pan under the container before removing the washer solvent container level sensor.

Using a small flat-bladed tool, remove the washer solvent container level sensor from the washer solvent container.
Remove the seal from the washer solvent container.