Removal Procedure

WARNING: This page is about a different variant/trim than selected.

NOTE: Use care when handling the coolant sensor. Damage to the coolant sensor will affect the operation of the fuel control system.

Partially drain the cooling system. Refer to Draining and Filling Cooling System in Engine Cooling.
Remove the thermostat housing. Refer to Thermostat Replacement (3.4L) or Thermostat Replacement (3.8L) in Engine Cooling.
Disconnect the ECT sensor electrical connector.
Remove the ECT sensor.

Fig 1: Removing ECT Sensor

Courtesy of GENERAL MOTORS CORP.