LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Impala Base, 3.4 E >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Control System 3.8L (Introduction)) >> Repair Instructions >> Intake Air Temperature (IAT) Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the intake air temperature (IAT) sensor electrical connector.
  2. Remove the IAT sensor (3) with a twisting and pulling motion.
    3. Fig 1: Removing IAT Sensor
    GM760425Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals