Scan Tool Data Definitions
- Door Ajar Switches
-
The scan tool displays Open/Closed. The passenger door ajar switch input to the body control module (BCM), where an open door is displayed as Open.
- Door Lock Motor
-
The scan tool displays Active/Inactive. The BCM output to the door lock actuators, where Lock is displayed as Active.
- Door Unlock Switch
-
The scan tool displays Active/Inactive. The driver and front passenger door lock switches input to the BCM, where a switch in the Lock or Unlock position is displayed as Active.
- Door Unlock Motor
-
The scan tool displays Active/Inactive. The BCM output to the passenger door lock actuators, where Unlock is displayed as Active.
- Doors Battery Fd
-
The scan tool displays Active/Inactive. The state of the door lock system battery feed circuit as seen by the BCM, where a complete circuit is displayed as Active.
- Doors System Gnd
-
The scan tool displays Active/Inactive. The state of the door lock system ground circuit as seen by the BCM, where a complete circuit is displayed as Active.
- Driver Door Open Sw.
-
The scan tool displays Open/Closed. The driver door open switch input to the BCM, where an open door is displayed as Open.
- Drivers Door Unlock Motor
-
The scan tool displays On/Off. The BCM output to the driver door lock actuator, where Unlock is displayed as On.
- Electronics Battery Fd
-
The scan tool displays volts. The state of the battery voltage supplied to the BCM.
- Key Cylinder Unlock
-
The scan tool displays On/Off. The key cylinder unlock switch input to the BCM, where a key cylinder in the unlock position is displayed as On.
- Software Part Number
-
The scan tool displays the BCM program part number. This is used to determine applicability to vehicle RPO content.