Installation Procedure
WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Install the wiper motor (1). Refer to Windshield Wiper Motor Replacement .
- Connect the electrical connector to the wiper motor.
- Position the wiper module assembly (2) into the plenum.
- Install the fasteners (1) attaching the wiper module assembly to the plenum and tighten to 10 N.m (89 lb in).
- Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
- Install the wiper arms. Refer to Windshield Wiper Arm Replacement .
- Inspect the washers for proper operation.
CAUTION:
Refer to Fastener Caution .