Side Object Sensor Module Scan Tool Information (Right Side Object Detection Module)
WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
Right Side Object Detection Scan Tool Parameters
| Parameter | System State | Expected Value | Definition |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Beam 1-7 Range | - | cm | The scan tool displays the range in centimeters. |
| Driver Interface 1-16 History | - | Enabled | The scan tool displays Enabled, Disabled, Turn Signal, Clean Required, Service Required and Unavailable. This captures any interactions with the sensors. |
| Right SOD Sensor Status | - | Low Power | The scan tool displays Low Power, OFF, Disabled Reporting, Not Reporting and Blocked. This is the status of the right side object detection sensor. |
| Obj Present in Alert Zone | - | No | The scan tool displays Yes or No. Yes is displayed if an object is detected in the specified alert zone. |
| Object in Beam 1-7 Present | - | No | The scan tool displays Yes or No. Yes is displayed when an object is detected in the specified beam area. |
Right Side Object Detection Module Output Controls
| Scan Tool Output Control | Description |
|---|---|
| Force Static Alert Zone | This output control calibrates the right side object detection sensor |