LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Impala LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 760 (Programming And Setup - All Systems) >> Repair Instructions >> Electronic Suspension Control Module Programming and Setup >> Electronic Suspension Control Module (ESCM) Replacement/Reprogramming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Electronic Suspension Control Module (ESCM) Replacement/Reprogramming

WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.

If the electronic suspension control module (ESCM) is replaced, the following procedures must be performed:

  1. ESCM programming-Refer to Service Programming System (SPS) .
  2. Revise the trim set calibration using the scan tool ALC Trimset Special Function. Refer to Suspension Position Calibration .
scientia non olet · About LEMON Manuals