Body Control Module Replacement

WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Body Control Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the RH instrument panel insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side . Remove the right windshield pillar trim. Refer to Body Hinge Pillar Trim Panel Replacement . Remove the metal bracket.
1	Body Control Module (BCM) Tip: Depress the locking tab on the bracket and disconnect the electrical connectors to remove. The replacement BCM must be programmed. Refer to Control Module References .

Callout

Component Name

Preliminary Procedure

Remove the RH instrument panel insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
Remove the right windshield pillar trim. Refer to Body Hinge Pillar Trim Panel Replacement .
Remove the metal bracket.

Body Control Module (BCM)
Tip:

Depress the locking tab on the bracket and disconnect the electrical connectors to remove.
The replacement BCM must be programmed. Refer to Control Module References .