LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Impala LS >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Shoulder Belt Guide Adjuster Replacement - Front (Impala) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    IMPORTANT: Verify that the release lever is at the top of the adjuster bracket in the full up position.
  1. Position the shoulder belt guide adjuster bracket to the center pillar.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bracket bolts to the shoulder belt guide adjuster.

    Tighten:  Tighten the bracket bolts to 42 N.m (31 lb ft).

  3. Install the trim panel for the upper center pillar. Refer to Trim Panel Replacement - Upper Center Pillar (Impala) in Interior Trim.
    4. Fig 1: Installing Front Shoulder Belt Guide Belt Adjuster Bracket (Impala)
    GM471267Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals