April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

Install the console shift control into the vehicle.

NOTE: Refer to Fastener Notice in Cautions and Notices

Install the console shift control retaining nuts.
Tighten: Tighten the console shift control retaining nuts to 24 N.m (18 lb ft).

Fig 1: Console Shift Control Assembly

GM161200

Courtesy of GENERAL MOTORS CORP.

Install the park/lock cable. Refer to Park Lock Cable Replacement .
Install the automatic transaxle range selector cable. Refer to Automatic Transmission Range Selector Cable Replacement .
Install the console shift control wiring harness.
Install the console wiring harness.

Fig 2: Installing Console Shift Control Wiring Harness

GM161196

Courtesy of GENERAL MOTORS CORP.

Install the console trim plate. Refer to Trim Plate Replacement - Front Floor Console (Monte Carlo) or Trim Plate Replacement - Front Floor Console (Impala) or Console Replacement - Front Floor (Impala) or Console Replacement - Front Floor (Monte Carlo) in Instrument Panel, Gauges and Console.