LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Malibu Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the ground cable.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the nut to retain the ground cable to the bellhousing stud.

    Tighten:  Tighten the ground cable nut to 25 N.m (18 lb ft).

  3. Install the front transmission mount. Refer to Transmission Mount Replacement - Front in Automatic Transaxle - 4T40-E/4T45-E.
  4. Install the lower closeout panel. Refer to Radiator Air Baffle and Deflector Replacement - Side (L61) and Radiator Air Baffle and Deflector Replacement - Side (LX9) in Engine Cooling.
  5. Lower the vehicle.
  6. Install the negative cable to the retainers.
    7. Fig 1: Taping Positive Cable And Ground Strap To Negative Cable
    GM106524Courtesy of GENERAL MOTORS CORP.
  7. Tape the positive cable and the ground strap to the negative cable.
    8. Fig 2: Retaining Ground Cable To Core Support
    GM1275980Courtesy of GENERAL MOTORS CORP.
  8. Install the bolt to retain the ground cable to the core support.
  9. Connect the negative ground cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
scientia non olet · About LEMON Manuals