Removal Procedure

Fig 1: View Of Fuel Pump Access Cover

Courtesy of GENERAL MOTORS CORP.

CAUTION: Remove the fuel tank cap and relieve the fuel system pressure before servicing the fuel system in order to reduce the risk of personal injury. After you relieve the fuel system pressure, a small amount of fuel may be released when servicing the fuel lines, the fuel injection pump, or the connections. In order to reduce the risk of personal injury, cover the fuel system components with a shop towel before disconnection. This will catch any fuel that may leak out. Place the towel in an approved container when the disconnection is complete.

Relieve the fuel system pressure. Refer to Fuel Pressure Relief .

Fig 2: View Of Fuel Pump Assembly And Electrical Connector

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Battery Disconnect Caution .

Disconnect the negative battery cable.
Remove the rear seat. Refer to Rear Seat Cushion Replacement .
Remove the fuel pump access cover.
Disconnect the electrical connector at the fuel pump assembly.
Disconnect the fuel line.

Fig 3: View Of Fuel Pump Assembly And Clip

Courtesy of GENERAL MOTORS CORP.

Remove the fuel pump assembly clip.
Remove the fuel pump assembly from the tank.